Italab

LPF - ISM - LOW PASS FILTER 1 KW

LOW PASS FILTER THAT GUARANTEES A HARMONIC AND SPURIOUS PRODUCT - 60dBc. SUITABLE FOR PALLET HF 1000P SERIES, IT IS MADE ON THE DESIRED FREQUENCIES (eg 6,8 - 13,56 - 27,12 - 40,68 - MHz) ON REQUEST AT OPERATIVE RANGES INCLUDED BETWEEN 1.5 - 70 MHz .
APPLICABLE POWER 1 KW

HVU 100 - RF PALLET 100 W , 10 - 550 MHz

NEW RF PALLET AMPLIFIER FOR THE HF - V - UHF RANGE, OUTPUT POWER 100 WATT, 10 - 550 MHZ., POWER SUPPLY + 47 - 50 VOLT, 6 - 7 A. DRIVING 5 - 6 W. A LARGE COPPER BASE GUARANTEES ADEQUATE DISTRIBUTION OF THE HEAT GENERATED BY THE AMPLIFIER MOSFET.
DIMENSIONS: 125mm X 100mm X 30.5mm

HF 1000P 6.78 - 1 KW, 6,78 MHz MHz.

The HF 1000P 6.78, is an amplifier that can work from "class C to class A" depending on the type of polarization that is set directly by the appropriate trimmer of the polarizer on board.
This peculiarity makes this device the ideal component for all those applications that the systems designer can develop.
Designed for ISM applications and requirements on the 6.78 MHz range, ideal for industrial, medical-scientific use.
With appropriate combiners, in a "multipallet" configuration it is possible to reach high powers up to over 20 KW.
The power supply is 47 -50 volts with a typical current of 29 - 30 A. @ 1KW carrier, a generous copper base dissipates the energy-heat developed by the MOSFET device.

HF 1000P13 - 1 KW, 13.56 MHz.

The HF1000P13, is an Amplifier that can work from "class C to class A" according to the type of polarization that is set directly by the special trimmer of "BIAS" on board.
This peculiarity makes this device the ideal component for all those applications that the systems designer can develop.
Made for 13 -14 MHz ISM applications and requirements, ideal for industrial, medical-scientific use.
With appropriate combiners, in a "multipallet" configuration it is possible to reach high powers up to over 20 KW.
The power supply is 47 -50 volts with a typical current of 29 - 30 A. @ 1KW carrier, a generous copper base dissipates the energy-heat developed by the MOSFET device.

HF 1000P27 - 1 KW, 27.12 MHz.

The HF1000P27, is an Amplifier that can work from "class C to class A" according to the type of polarization that is set directly by the special trimmer of "BIAS" on board.
This peculiarity makes this device the ideal component for all those applications that the systems designer can develop.
Made for 27 - 28 MHz ISM applications and requirements, ideal for industrial, medical-scientific use.
With appropriate combiners, in a "multipallet" configuration it is possible to reach high powers up to over 20 KW.
The power supply is 47 -50 volts with a typical current of 29 - 30 A. @ 1KW carrier, a generous copper base dissipates the energy-heat developed by the MOSFET device.

HF 1000P40 - 1 KW, 40.68 MHz.

The HF1000P40, is an Amplifier that can work from "class C to class A" according to the type of polarization that is set directly by the special trimmer of "BIAS" on board.
This peculiarity makes this device the ideal component for all those applications that the systems designer can develop.
Made for 39 - 43 MHz ISM applications and requirements, ideal for industrial, medical-scientific use.
With appropriate combiners, in a "multipallet" configuration it is possible to reach high powers up to over 20 KW.
The power supply is 47 -50 volts with a typical current of 29 - 30 A. @ 1KW carrier, a generous copper base dissipates the energy-heat developed by the MOSFET device.

AMD 400 - 80 - 500 W 81.36 MHz

AMD 1K 80 - 1 KW 81.36 MHz

AMP 500 LBHV - HF VHF AMPLIFIER 500 W

Broadband amplifier operating from 10 MHz. 150 MHz. Output power 500-600 watts (depending on the band), Supplied at 48.5 volts, current between 13 and 15 A depending on the band. Ideal to make "JAMMER" across the HF / VHF. Small size (135 x 50 x 50). It uses the Freescale 1250 Watt Mosfet with SWR 65: 1 (MRFE6VP61K25H ) that, at the power of 500-600 watts, delivers an excellent SWR protection from "load" mismatching. The class of operation and "AB" but It can be changed by the special "Polarizer" from "C" to "A" (of course in A class the power will reduce to 200 Watt)

MDI 5000UP, 500 WATT 433,92 MHz

The MD500UP, is an amplifier that can work from "class C to class A" depending on the type of polarization that is set directly by the appropriate trimmer of the polarizer on board.
This peculiarity makes this device the ideal component for all those applications that the systems designer can develop.
Made for applications and for ISM needs on the permitted 433.92 MHz range, ideal for industrial, medical-scientific use.
With appropriate combiners, in a "multipallet" configuration it is possible to reach high powers up to over 10 KW.
The power supply is 47 -50 volts with a typical current of 16-18 A. @ 1KW carrier, a generous copper base dissipates the energy-heat developed by the MOSFET device.

MDI 1KU , 1 KW 433,92 MHz

The MDI 1KU, is an amplifier that can operate from "class C to class A" depending on the type of polarization that is set directly by the appropriate trimmer of the polarizer on board.
This peculiarity makes this device the ideal component for all those applications that the systems designer can develop.
Made for applications and for ISM needs on the permitted 433.92 MHz range, ideal for industrial, medical-scientific use.
With appropriate combiners, in a "multipallet" configuration it is possible to reach high powers up to over 20 KW.
The power supply is 47 -50 volts with a typical current of 29-31 A. @ 1KW carrier, a generous copper base dissipates the energy-heat developed by the MOSFET device.